北京生物醫學工程

嬰兒輻射保暖臺床面溫度場仿真研究

Simulation study of temperature distribution on mattress for infant radiant warmer

作者：何棟王琪林定余楊海仕胡燕海

單位：寧波大學機械工程與力學學院（浙江寧波315211）<p>寧波戴維醫療器械股份有限公司（浙江寧波 315712）</p>

關鍵詞：嬰兒輻射保暖臺；熱輻射；溫度均勻性；數值模擬；有限元方法；仿真

分類號：R318.01

出版年·卷·期（頁碼）：2019·38·1（22-27）

摘要：

目的通過數值模擬（numerical simulation）得到床面溫度場結果，并與試驗比較，探討有限元方法（finite element methods，F(xiàn)EM)應用于保暖臺溫度場分析的可行性，從而為使用數值模擬方法輔助該類產品結構的優化設計提供參考價值。方法本文使用三維軟件SOLIDWORKS建立了當前D公司某型號輻射保暖臺的相關模型，然后導入ANSYS中，對保暖臺在20℃環境以及全功率工作狀態下的床面溫度場進行有限元仿真，獲得了主要測試點的溫度數值及均勻性的仿真結果。與此同時，實際采用多通道溫度記錄儀和紅外熱像儀對床面的主要測試點及整體溫度場進行記錄，最后對仿真與試驗數據進行誤差分析。結果使用合理的計算方法得到仿真與試驗測試點的誤差率均在10%以內，且溫度場的分布趨勢也基本一致，驗證了該有限元仿真方法有效。結論該有限元仿真方法所得數值比較準確，能夠提前預測輻射溫度場，輔助保暖臺產品結構的優化設計。

Objective To discuss the feasibility of finite element methods(FEM) in thermal analysis of radiant warmer, and to provide reference value for using numerical simulation to assist in optimization and design of products, the simulation of temperature distribution on mattress is compared with experiment.Methods Using three-dimension software SOLIDWORKS a radiation warmer heating device model of D company was built, which was then imported into ANSYS to simulate the mattress distribution under the conditions of 20℃ and full power operation. Thetemperature values and uniformity of main test points were obtained in simulation. Meanwhile, muti-channel temperature recorder and infrared camera were used for experiment to record the values of test points and temperature field. The deviation of simulation and experiment was analyzed at last. Results Error rates of test points in simulation and experimentwere all within 10% and the distribution of temperature field was consistent, which proved that FEM analysis was valid. Conclusions FEM obtains accurate numerical values, which can be used to predict the temperature distribution and assist the optimal design of radiant warmer products.

參考文獻：

[1]王陽,水珊珊,王霞.遠紅外在生物醫學臨床上的應用及其作用機制[J].科技導報,2014,32(30):80-84.

Wang Y, Shui SS, Wang X. Molecular mechanism of far-infrared therapy and its application in biomedicine[J]. Science and Technology Review,2014,32(30):80-84.

[2]林麗妮,陳慈,黃巧燕.遠紅外輻射保溫臺與嬰兒培養箱保暖對早產兒生命體征及體質量的影響[J].中國中西醫結合兒科學,2016,8(1):120-122.

Lin LN, Chen C, Huang QY. Effect of far-infrared radiation heat preservation and infant incubator to keep warm on the vital signs and body quality of premature infants[J]. Chinese Pediatrics of Integrated Traditional and Western Medicine, 2016,8(1):120-122.

[3] Fic AM, Ingham DB, Ginalski MK, Nowak AJ, Wrobel L. Heat and mass transfer under an infant radiant warmer—development of a numerical model[J]. Medical Engineering and Physics,2010,32(5):497-504.

[4]RoongprasertK,Phasukkit P, Pintavirooj C,et al.Heat and mass transfer of infant radiant warmer by computer simulation[C].Biomedical Engineering International Conference.IEEE,2013:1-4.

[5]Marek R,Ireneusz S.Numerical and experimental analysis of infant radiant warmer[J].Computer Assisted Mechanics and Engineering Sciences,2013, 20(3): 237-265.

[6]YY 0455-2011，醫用電氣設備第2部分：嬰兒輻射保暖臺安全專用要求[S].中國標準出版社，2013.

YY 0455-2011, Medical electrical equipment-part2: particular requirements for the safety of infant radiant warmers[S].Standards Press of China,2013.

[7]朱小芳,李紅波,薛永勝.反射罩光學設計與均勻性仿真[J].光電技術應用, 2010, 25(6): 18-21.

Zhu XF, Li HB, Xue YS. Optical design and uniform simulation of reflector[J]. Electro-Optic Technology Application, 2010, 25(6): 18-21.

[8]楊世銘,陶文銓.傳熱學第四版[M].高等教育出版社,2006.

Yang SM, Tao WQ. The fourth edition of heat transfer[M].Higher Education Press,2006.

[9]何成.雙光源選擇性激光燒結預熱與后固化工藝研究[D]西安：西安科技大學, 2013.

He C. Research on preheating and post-curing for selective laser sintering with dual light sources[D]. Xi'an：Xi'an University of Science and Technology,2013.

[10]王金龍. ANSYS12.0有限元分析與范例解析[M].北京:機械工業出版社, 2010.

Wang JL. Finite element analysis and case analysis of ANSYS 12.0[M]. Beijing: Mechanical Industrial Press, 2010.

[11]徐冰,馬龍,鄭興林,王昭鑫.基于ANSYS對遙感器鋁合金鏡頭低溫環境試驗技術的研究[J]. 航天器環境工程, 2012, 29(01): 32-37.

Xu B, Ma L, Zheng XL, Wang SX. Study on low temperature of the aluminum camera lens of remote sensor by ANSYS software[J].Spacecraft Environment Engineering, 2012, 29(01): 32-37.

[12]褚治德, 汪健生, 孟憲玲.紅外加熱輻射的基本理論與實踐研究[C].錦州市光學學會.全國紅外加熱暨紅外醫學發展研討會論文及論文摘要集.遼寧錦州：錦州市光學學會，2011: 10-15.

[13]饒連江.基于ANSYS的LED燈具熱分析[J].照明工程學報, 2010, 21(1): 53-57.

Rao LJ. Thermal analysis for LED lamp based on ANSYS[J].China Illuminating Engineering Journal, 2010, 21(1): 53-57.

[14]任婷婷,胡德龍,張雯,等.嬰兒輻射保暖臺溫度校準實驗研究[J].計量技術,2016(6):50-52.

Ren TT, Hu DL, Zhang W, et al. Research on temperature calibration experiment of infant radiant warmer[J]. Measurement Technique, 2016(6):50-52.

[15]JFF1001-2011,通用計量術語及定義[S].北京:中國計量出版社,2011

JFF1001-2011,General measurement and definitions[S].Beijing: China Metrology Publishing House,2011.

服務與反饋：

【文章下載】【加入收藏】

提示：您還未登錄，請登錄！點此登錄

51黑料吃瓜在线观看,51黑料官网|51黑料捷克街头搭讪_51黑料入口最新视频