51黑料吃瓜在线观看,51黑料官网|51黑料捷克街头搭讪_51黑料入口最新视频

設為首頁 |  加入收藏
首頁首頁 期刊簡介 消息通知 編委會 電子期刊 投稿須知 廣告合作 聯系我們
CCD數據采集系統中EZ-USB_FX2的固件程序設計及應用

Firmware Design Based on EZUSB FX2 in CCD Data Acquisition System

作者: 張倩  陸建榮  劉有軍 
單位:北京工業大學生命科學與生物工程學院(北京 100124)
關鍵詞: CY7C68013;CCD數據采集系統;USB20;固件程序;GPIF 
分類號:
出版年·卷·期(頁碼):2010·29·2(149-153)
摘要:

CCD(電耦合器件)數據采集系統要求其接口能夠?qū)崿F(xiàn)快速穩定的數據傳輸。CY7C68013是一款集成USB2.0方案的芯片,其設計能充分體現USB2.0的數據帶寬特征。本文結合CCD數據采集系統的特點,利用CY7C68013芯片設計USB2.0數據接口,重點分析了GPIF(通用可編程接口)模式下的固件程序設計,包括GPIF波形設計、端點配置和讀事務處理等,實現基于USB2.0的單向數據傳輸功能。在測試實驗中,將外部信號源發出的數據由外設FIFO(先入先出存儲器)傳輸至上位機,實現了高速的數據傳輸,測得最大的傳輸速度為113.6Mb/s。
 

Stable and fast data transmission of data acquisition system interface is needed for the special characters of charge couple device(CCD)output signals. CY7C68013 chip is a USB2.0 integrated microcontroller particularly designed to fully reflect data bandwidth of USB2.0. According to the features of CCD data acquisition system,an USB2.0 interface was designed based on CY7C68013 chip to realize data unidirection transmission. This paper mainly focused on the firmware design in general programmable interface (GPIF)mode,including programming the GPIF waveforms,configuration of endpoints and FIFO first in first outRead transactions. In the experiment,data generated from external source was stored in peripheral FIFO and then transmitted by the designed interface to the host,reaching highspeed streaming data of 113.6Mb/s.
 

參考文獻:

[1]Universal Serial Bus Specification Revision 2.0,2001.
[2]周煒,徐圣普, 趙金城, 等. USB接口技術在現代醫學儀器中的應用[J]. 國際生物醫學工程雜志, 2007, 30(1): 62-64.
[3]陳云飛, 胡榮強, 李偉. 基于EZ-USBFX2的固件程序設計[J]. 電子元器件應用, 2007, 9(1): 42-44.
[4]Cypress Semiconductor Corporation. EZ-USB FX2TM USB Microcontroller, 2005.
[5]Cypress Semiconductor Corporation. EZ-USB FX2 Technical Reference Manual, 2002.
[6]張濤, 浦國斌, 范志永, 等. 一種CCD光譜儀的USB2.0固件設計[J]. 微計算機信息(測控自動化), 2008,(25): 303-304.
[7]錢峰. EZ-USB FX2單片機原理、編程及應用[M]. 北京: 北京航天航空大學出版社, 2006.
[8]劉久思, 趙蔚. 實現USB2.0高速數據傳輸?shù)膯栴}探討[J]. 計算機工程與應用, 2007, 43(2):75-77.
 
 

服務與反饋:
文章下載】【加入收藏
提示:您還未登錄,請登錄!點此登錄
 
友情鏈接  
地址:北京安定門外安貞醫院內北京生物醫學工程編輯部
電話:010-64456508  傳真:010-64456661
電子郵箱:[email protected]