北京生物醫學工程

數字化全景齒科成像系統中電源系統的設計

Design of power supply system for digital panoramic dental imaging system

作者：于苒陸建榮劉有軍

單位：北京工業大學生命科學與生物工程學院(北京100124)

關鍵詞： TDI CCD；電源；AC/DC模塊；穩壓器

分類號：

出版年·卷·期（頁碼）：2012·31·6（611-615）

摘要：

目的不同的數字化全景齒科成像系統對電源的要求不盡相同，難以規范化、產品化，故需結合其自
身特征設計專用的電源系統。方法首先對數字化成像系統所需供電電壓及其硬件電路的物理結構進行分
析，然后通過分析AC/DC電源模塊、線性穩壓器和開關型穩壓器的種類、輸出紋波、功耗及轉換效率等工
作特性及應用范圍，提出一種開關型穩壓電源和線性穩壓電源相結合的電源系統設計方案。結果通過
AC/DC電源模塊、低壓差線性穩壓器(low dropout regulator,LDO)和開關型穩壓器實現了電源的功耗低、
發熱小、電磁干擾輕、紋波小、重量輕和體積小的設計目標。結論提高了數字化全景齒科成像系統工作
的穩定性及系統的整體性能。

Objective The design of power supply system for digital panoramic dental imaging
system is special to meet the different requirements of the power supply systems.Methods We
analyzed the needed voltages and hardware circuits’ physical structure of digital panoramic
dental imaging system firstly.After analyzing the performance characteristic — such as
class,ripple,consumption and conversion efficiency — as well as the application areas,this
paper provided a design proposal of power supply system which combined switching mode
voltage stabilizer with linear voltage stabilizer.Results The design targets,such as low
consumption,low heat,light electro-magnetic interference (EMI),low ripple,light weight and
small volume,were achieved by the use of AC/DC module,low dropout regulator (LDO) and
switching mode voltage regulator.Conclusions The stability and the whole performance of
digital panoramic dental imaging system were improved.

參考文獻：

［1］周望.CCD數字相機的電源系統設計［J］.電子技術應用,2008，(2):60-65.
Zhou Wang.Design for power supply system of a CCD digital camera［J］.Application of
Electronic Technique,2008，(2):60-65.
［2］楊碧石.電源設備中AC/DC和DC/AC變換電路［J］.南通職業大學學報,2001,15(1):15-18.
Yang Bishi.AC/DC and DC/AC converty circuits in power supply equipment［J］.Journal of
Nantong Vocational College,2001,15(1):15-18.
［3］張占松.開關電源的原理與設計［M］.北京:電子工業出版社,2005.
Zhang Zhansong.The Principle and Design of Switch Power Supply ［M］.Beijing:Electronic
Industry Press,2005.
［4］沙占友.單片開關電源的發展及其應用［J］.電子技術應用,2000,26(1):4-6.
Sha Zhanyou.The development and application of single piece of switch power supply
［J］.Application of Electronic Technology,2000,26(1):4-6.
［5］張倩.基于TDI CCD齒科全景數字化成像系統的硬件設計［D］.北京:北京工業大學，2010.
Zhang Qian.Hardware design of dental panoramic digital radiography system based on TDI-CCD［
D］.Beijing：Beijing University of Technology,2010.
［6］Cowell A.性能接近線性穩壓器的下一代移動DC-DC轉換器［J］.電子產品世界,2007，(5):111-113.
Cowell A.Next generation mobile DC-DC converters that appear like linear regulators
［J］.Electronic Engineering & Product World,2007，(5):111-113.
［7］張文成.印制電路板設計的電磁兼容性分析［J］.電子工藝技術,2009,30(40):210-213.
Zhang Wencheng.Analysis of electromagnetic compatibility for design of printed circuit board
［J］.Electronics Process Technology,2009,30(40):210-213.
［8］劉鉆,呂霆.分布式系統中的電磁兼容設計［J］.電子工藝技術,2006,27(4):221- 223.
Liu Zuan,Lv Ting.EMC in distribute system［J］.Electronics Process Technology,2006,27
(4):221- 223.

服務與反饋：

【文章下載】【加入收藏】

提示：您還未登錄，請登錄！點此登錄

51黑料吃瓜在线观看,51黑料官网|51黑料捷克街头搭讪_51黑料入口最新视频